For combustible gases / CO detection in environment with temperature higher than 100 °C.
The SD-2600 represents truly unique products with few other competitors, especially regarding its durability towards high temperature
The Model SD-2600 is a fixed mount, continuous-monitoring detector head and provides a 4-20mA signal which indicates the target gas reading for use by a gas monitoring controller, recording device, or programmable controller. There is one relay, and the relay is used for the gas alarm or the fail alarm.
Main Features
The gas monitor is a fixed type detector head that continuously detects combustible gases and that performs the alarm activation when the gas concentration is over the setting value.
This gas monitor is a safety unit, not an analyzer or densitometer which performs quantitative/qualitative analysis/measurement for gases. Please fully understand the features of the gas monitor before using it, so that it can be used properly.
The gas monitor detects abnormalities in the air caused by presence of gases or other reasons (leak) with the built-in gas sensor. The concentrations of detected gases are displayed on the seven-segment LED.
The gas monitor has a built-in alarm contact and can be used either as a gas alarm, fault alarm, or common (gas, fault) alarm.
The gas monitor outputs gas concentration in 4 – 20 mA.
Technical Features
Protection Method: Flameproof enclosure “d”
Certificate Numbers: IECEx DEK 11.0040X - DEKRA 11ATEX0095 X
Group: II
Category: 2G
Type of Protection and Marking code: Ex db IIC T2
Equipment Protection Level: Gb
Ambient Temperature: -20°C to +60°C
Process Temperature: 200 °C (Flame-Proof EXD IICT2)
